Robotic Demolition Machinery
Case Study 1
We
were tasked with forming openings on a roof slab these were ranging in sizes
from 1200mm x 1200mm up to 6000mm x 1500mm all through a 200mm thick structural
slab with a 50mm topping on that.
The problems facing us here were numerous first the access to the roof was limited to a 110-volt electric pulley, which only had the capability of lifting 600kgs. On top of this the access hatch was minute with the final problem being the weight allowed on the slab and so with all these problems combined it left us with no option but to put our BROKK 40 to work.
The job was completed on time on budget and most importantly safely.
